JC30 Mini Foldable Walk-behind Floor Scrubber

1. Product Introduction 
JC30 Mini Foldable Walk-behind Floor Scrubber is a manual push floor cleaning machine with overall dimensions of 880580680mm and total weight of 76kg. It reaches a working efficiency of 1600 square meters per hour, fitted with a 400mm brush cleaning width and a 550mm suction nozzle width. The unit contains a 25L clean water tank and a 30L wastewater tank, powered by a 24V 45Ah battery that enables up to 3 hours of continuous operation, with operational noise controlled at no more than 68dB. It adopts an integrated three-in-one cleaning module to finish water spraying, surface scrubbing and wastewater collection in one single pass. The foldable ergonomic handle fits operators of different heights, while externally arranged sewage pipes, wide-mouth water filling inlet and external charging plug simplify water filling, pipeline maintenance and charging workflows.
2. Core Advantages
Compact body structure enables smooth movement through narrow aisles and segmented small spaces
Integrated three-in-one cleaning system cuts redundant operation steps by finishing full cleaning in one pass
24V 45Ah battery pack supports up to 3 hours of uninterrupted continuous cleaning
External layout for all pipelines and charging components removes extra disassembly steps in daily maintenance
Operation noise capped at 68dB to fit cleaning tasks in noise-restricted indoor zones
3. Product Features
Body & Operating System
Overall dimension: 880580680mm, total weight 76kg; foldable handle to reduce storage space occupation
Adjustable ergonomic handle, designed for low-resistance manual pushing for operators of all heights
Cleaning Power System
24V 380W brush motor matched with 400mm brush disc for ground scrubbing
24V 500W suction motor paired with 550mm wide suction nozzle for wastewater recovery
Combined module integrating water spraying, surface scrubbing and sewage collection functions
Liquid Storage System
25L clean water tank equipped with wide-mouth inlet to shorten water filling time
30L wastewater tank for sewage storage during long-duration cleaning tasks
External sewage pipe structure for easy disassembly and regular flushing
Power Supply System
24V 45Ah battery assembly, supporting maximum 3 hours non-stop operation
External charging plug, tank disassembly is not required during charging procedures
Noise Performance
Full-load running noise limited to ≤68dB
4. Application Scenarios
This scrubber fits indoor medium-sized spaces with narrow passages, including retail supermarkets, office buildings, catering stores, hotel public rest areas, beauty salons, medical clinics, small-to-medium warehouses and factory workshops. It can operate on tile, epoxy, vinyl and polished concrete ground surfaces.
5. Operation & Maintenance Notes
Drain all wastewater from the recovery tank after each operation to stop sediment buildup inside tanks and pipelines
Disassemble and flush external sewage pipes on a regular basis to avoid blockages that lower suction performance
Complete full charging via the external plug before long-duration cleaning assignments
Fold the handle after operation to minimize space required for storage
Check brush disc abrasion before each startup; replace worn brush accessories to maintain consistent cleaning coverage
6. Common Problems & Solutions
Reduced wastewater suction capacity
Solutions: Inspect external sewage pipes for blockages, wipe residue off suction nozzle rubber strips, empty fully filled wastewater tank
Short continuous operation time
Solutions: Complete full charging per cycle, test battery aging status and replace battery group when runtime declines significantly
Slow water filling speed
Solutions: Clear debris accumulated within the wide-mouth clean water inlet
Abnormal noise during operation
Solutions: Remove foreign objects trapped on brush disc, check loose wiring connections for brush and suction motors
7. Technical Parameter Description
The machine delivers 1600 square meters hourly working efficiency, with a 400mm cleaning width and a 550mm suction nozzle width. It is configured with a 24V 380W brush motor and a 24V 500W suction motor. The clean water tank holds 25 liters and the wastewater tank holds 30 liters. The 24V 45Ah battery pack supports 3 hours of continuous operation, with running noise controlled at ≤68dB. Its overall dimension measures 880580680mm, and the total weight of complete equipment is 76 kilograms.