JC100 Ride-on Lithium Battery Industrial Floor Scrubber

JC100 Ride-on Lithium Battery Industrial Floor Scrubber Product Page Content
1. Product Introduction
JC100 ride-on floor scrubber has overall dimensions of 1500*830*1040mm and reaches a working efficiency of 4150 square meters per hour, equipped with a 500mm cleaning width and a 900mm water absorption width. It is fitted with a 24V 550W brush motor, a 24V 500W suction motor and a 24V 500W drive motor. The machine holds a 100L clean water tank and a 110L wastewater tank, powered by optional 24V 100Ah lithium or lead-acid batteries. A full charging cycle takes 5–8 hours to support 3–5 hours of continuous operation. It adopts wide-mouth water filling inlet and external sewage pipe layout, with ergonomic steering control and external charging plug to simplify daily refilling, pipeline maintenance and charging procedures. The integrated cleaning module completes scrubbing and sewage recovery in a single pass.

2. Core Advantages
1. 500mm brush width matched with 900mm squeegee supports 4150㎡ hourly cleaning coverage to cut total working cycles for large spaces
2. Three independent 24V power motors supply separate power for scrubbing, sewage suction and vehicle driving
3. Dual tank structure with 100L clean water and 110L wastewater storage extends intervals for water refilling and sewage draining
4. Two alternative battery types, lithium and lead-acid, are available to match different site power configuration plans
5. Externally arranged pipelines and charging ports reduce disassembly steps required for routine maintenance

3. Product Features
Power Drive System
- 24V 550W brush motor for floor scrubbing, 24V 500W suction motor for wastewater recovery, 24V 500W drive motor for automatic vehicle movement
- 24V 100Ah battery pack with two optional versions: lithium battery and lead-acid battery
- 5–8 hours full charging time, enabling 3–5 hours non-stop continuous operation after full charge
Liquid Storage System
- 100L clean water tank with wide-mouth inlet to shorten water filling duration
- 110L wastewater tank for sewage storage during long-duration cleaning tasks
- Detachable external sewage pipe for regular disassembly and dirt flushing
Cleaning Working System
- 500mm effective cleaning width, paired with 900mm full-width suction squeegee
- Integrated triple-function structure to finish water spraying, ground scrubbing and sewage recovery in one movement
Operation & Body Structure
- Overall dimension: 1500*830*1040mm, ride-on steering wheel control structure
- Ergonomic steering layout that fits operators of different heights
- External charging plug design, tank disassembly is not required during charging procedures

4. Application Scenarios
This ride-on floor scrubber fits large-scale indoor ground environments with diversified floor materials, including factory workshops, logistics warehouses, large shopping malls, exhibition halls, station waiting areas, campus public areas and commercial plazas. It can run on tile, epoxy, vinyl, marble and polished concrete ground surfaces.

5. Operation & Maintenance Notes
1. Drain all wastewater inside the recovery tank after each operation to avoid sediment buildup blocking internal and external pipelines
2. Disassemble and flush external sewage pipes on a regular basis to remove accumulated dirt that lowers suction performance
3. Complete a full 5–8 hour charging cycle before long-duration continuous cleaning assignments
4. Inspect the tightness of motor wiring connections before each startup to avoid unstable power output
5. Store the machine in dry indoor space after use to prevent battery and motor component damp damage

6. Common Problems & Solutions
1. Weak wastewater suction capacity
Solutions: Clear dirt blockages inside external sewage pipes, wipe residue on squeegee rubber strips, empty fully filled wastewater tank
2. Short continuous working duration
Solutions: Complete full charging per cycle, inspect battery aging condition and replace battery group when runtime declines significantly
3. Slow water filling speed
Solutions: Clear debris accumulated inside the wide-mouth clean water inlet
4. Abnormal jitter during driving
Solutions: Check tire wear status, inspect loose wiring of the drive motor and remove foreign objects stuck on brush disc

7. Technical Parameter Description
The machine provides a working efficiency of 4150 square meters per hour, with 500mm cleaning width and 900mm suction width. It is equipped with a 24V 550W brush motor, a 24V 500W suction motor and a 24V 500W drive motor. The clean water tank capacity is 100 liters and the wastewater tank capacity is 110 liters. The overall dimension measures 1500*830*1040 millimeters. It uses a 24V 100Ah battery, with lithium battery and lead-acid battery as two options. It takes 5 to 8 hours to finish full charging and supports 3–5 hours of continuous operation.