JC2000 Full Closed Cabin Ride-on Industrial Floor Sweeper

JC2000 Full Closed Cabin Ride-on Industrial Floor Sweeper Complete English Product Page Content
1. Product Introduction
JC2000 fully enclosed cabin ride-on sweeper measures 2300*1900*1950mm with a net weight of 700KG. It delivers 15000 square meters per hour working efficiency with a 2000mm full sweeping width, composed of one 700mm main brush and four side brushes. Equipped with a 200L water tank for dust suppression and a 200L waste bin for debris storage, the machine uses a 1500W drive motor, matched with an 800W main brush motor, 310W fan motor, four 100W side brush motors and a 100W vibration dust cleaning motor. Two 48V maintenance-free dry battery options (100Ah, 150Ah) support 4–6 hours continuous operation, with a maximum driving speed of 10km/h and 25% climbing capacity. Zero-turn steering improves flexibility, and full transparent sealed cabin isolates wind, dust and rain for operators. All sweeping brushes are made of wear-resistant eco-friendly materials.

2. Core Advantages
1. Five-brush layout achieves a 2000mm sweeping width to reach 15000㎡ hourly cleaning coverage for extra-large ground areas
2. Two 48V battery specifications provide adjustable 4–6 hours continuous working time to match different cleaning schedules
3. 200L integrated waste bin extends the interval of waste dumping during long-hour continuous cleaning tasks
4. Zero-turn radius design supports in-place rotation to clean corners, curb edges and narrow passages
5. 25% climbing capacity enables stable sweeping on sloped roads, parking ramps and community gradient pavements

3. Product Features
Sweeping Power System
- Single 700mm main brush plus four side brushes, total sweeping width 2000mm, hourly efficiency up to 15000㎡
- Independent motor assembly: 1500W drive motor, 800W main brush motor, 310W fan motor, four 100W side brush motors, 100W vibration dust cleaning motor
- Maximum travel speed reaches 10km/h; stable operation on slopes with 25% gradient
Power Supply System
- Two optional 48V maintenance-free dry batteries: 100Ah and 150Ah
- Fully charged battery pack realizes 4–6 hours non-stop continuous sweeping
Dust Suppression & Waste Storage System
- 200L independent water tank to supply water mist for dust suppression during sweeping
- 200L detachable waste bin for centralized storage of dust, gravel, fallen leaves and packaging waste
Body & Operator Protection Structure
- Overall dimension 2300*1900*1950mm, net machine weight 700KG, equipped with full closed transparent cabin to block wind, dust and rain
- Zero-turn radius steering structure for flexible turning and edge cleaning
- Eco-friendly wear-resistant brush materials to lower regular accessory replacement frequency

4. Application Scenarios
This fully enclosed ride-on sweeper adapts to large-area outdoor cleaning environments including factory industrial zones, municipal main roads, logistics parks, residential compounds, campus public areas and large underground parking lots. It is compatible with cement and asphalt pavements, and the sealed cabin allows all-day operation under windy, dusty or light rain conditions.

5. Operation & Maintenance Notes
1. Empty all waste inside the 200L bin after each operation and remove hair, threads and debris tangled on main and side brushes
2. Refill the 200L water tank before sweeping tasks requiring dust suppression spraying
3. Complete full charging after daily use; avoid storing batteries with low residual power for long periods
4. Inspect brush abrasion regularly and replace worn brush components to maintain complete sweeping coverage
5. Activate vibration dust cleaning function and clean fan pipelines periodically to prevent blockages that reduce dust collection efficiency

6. Common Problems & Solutions
1. Reduced dust collection effect
Solutions: Clear blockages inside fan pipelines, run vibration dust cleaning motor to shake off filter dust, check sealing gap between waste bin and machine body
2. Short continuous working hours
Solutions: Upgrade to 150Ah high-capacity battery pack, finish complete charging cycle, test battery aging attenuation
3. Inflexible turning movement
Solutions: Remove foreign objects stuck on wheel hubs, adjust tightness of zero-turn steering connecting rod
4. Insufficient climbing power on slopes
Solutions: Confirm full battery charge status, inspect drive motor wiring, clear waste wrapped around brushes to lower operation load

7. Technical Parameter Description
The machine reaches working efficiency of 15000 square meters per hour with a 2000mm sweeping width, 700mm main brush length and 25% climbing capacity. The maximum working speed is 10km/h, equipped with a 200L water tank and a 200L waste bin. Overall dimension measures 2300*1900*1950mm, net weight 700KG. Drive motor power is 1500W; working motors include an 800W main brush motor, 310W fan motor, four 100W side brush motors and a 100W vibration dust cleaning motor. Two 48V battery specifications (100Ah, 150Ah) are optional, supporting 4–6 hours continuous operation. The machine adopts zero-turn radius steering design and is fitted with a fully closed transparent operator cabin.