JC1550 Front Windshield Canopy Ride-on Industrial Sweeper

JC1550 Front Windshield Canopy Ride-on Industrial Sweeper Full English Product Page Content
1. Product Introduction
JC1550 ride-on industrial sweeper fitted with front windshield canopy has overall dimensions of 1750*1550*1950mm and net weight of 580KG. It delivers hourly working efficiency of 12500 square meters with a 1550mm total sweeping width formed by one 800mm main brush and two side brushes. The machine carries a 100L water tank for dust suppression and a 220L waste bin for debris storage. It adopts a 1500W drive motor, matched with a 1000W main brush motor, 310W fan motor, dual 100W side brush motors and a 100W vibration dust cleaning motor. Three 48V maintenance-free dry battery options (86Ah, 100Ah, 150Ah) support 4–6 hours continuous operation, with maximum driving speed of 10km/h and 25% climbing capacity. Zero-turn steering structure improves maneuverability, and front windshield canopy blocks dust and wind for operators during outdoor operation. All sweeping brushes are manufactured from wear-resistant eco-friendly materials.

2. Core Advantages
1. Triple-brush combination forms 1550mm sweeping width to reach 12500㎡ hourly cleaning coverage for super-large ground areas
2. Three tiers of 48V battery capacity provide adjustable continuous working duration from 4 to 6 hours to match different cleaning schedules
3. 220L large-volume waste bin reduces waste dumping frequency during long continuous sweeping shifts
4. Zero-turn radius design enables in-place rotation to clean corners, narrow lanes and edge zones
5. 25% climbing capacity supports stable sweeping on ramps, sloped parking lots and community roads

3. Product Features
Sweeping Power System
- Single 800mm main brush plus two side brushes, total sweeping width 1550mm, hourly efficiency up to 12500㎡
- Independent motor configuration: 1500W drive motor, 1000W main brush motor, 310W fan motor, dual 100W side brush motors, 100W vibration dust cleaning motor
- Maximum travel speed reaches 10km/h; stable operation on slopes with 25% gradient
Power Supply System
- Three optional 48V maintenance-free dry batteries: 86Ah, 100Ah, 150Ah
- Full charged battery pack realizes 4–6 hours non-stop continuous sweeping
Dust Suppression & Waste Storage System
- 100L independent water tank to supply water mist for dust suppression during operation
- 220L detachable waste bin for centralized collection of dust, gravel, fallen leaves and packaging waste
Body & Operator Protection Structure
- Overall dimension 1750*1550*1950mm, net weight 580KG, equipped with front transparent windshield and top canopy to isolate flying dust and wind
- Zero-turn radius steering for flexible turning and edge cleaning
- Eco-friendly wear-resistant brush materials to lower regular accessory replacement costs

4. Application Scenarios
This ride-on sweeper fits large-area outdoor and semi-outdoor cleaning environments, including factory zones, municipal roads, residential communities, campus public areas, logistics yards and large parking lots. It adapts to cement and asphalt pavement, and the front windshield canopy supports long-hour outdoor operation under windy and light dust conditions.

5. Operation & Maintenance Notes
1. Empty all waste inside the 220L bin after each operation and clear debris tangled on main and side brushes
2. Refill the 100L water tank before sweeping tasks requiring dust suppression spraying
3. Complete full charging after daily use; avoid storing batteries with low residual power for long periods
4. Inspect brush abrasion regularly and replace worn brush components to guarantee full sweeping coverage
5. Activate vibration dust cleaning function and clean fan pipelines periodically to prevent blockages that weaken dust collection effect

6. Common Problems & Solutions
1. Weak dust collection capacity
Solutions: Clear blockages inside fan pipelines, run vibration dust cleaning motor to shake off filter dust, check sealing gap between waste bin and machine body
2. Short continuous working hours
Solutions: Upgrade to higher-capacity 100Ah or 150Ah battery pack, finish complete charging cycle, test battery aging attenuation
3. Stiff turning movement
Solutions: Remove foreign objects stuck on wheel hubs, adjust tightness of zero-turn steering connecting rod
4. Insufficient climbing power on slopes
Solutions: Confirm full battery charge status, inspect drive motor wiring, clear waste wrapped around brushes to reduce operation load

7. Technical Parameter Description
The machine achieves working efficiency of 12500 square meters per hour with a 1550mm sweeping width, 800mm main brush length and 25% climbing capacity. The maximum working speed is 10km/h, equipped with a 100L water tank and a 220L waste bin. Overall dimension measures 1750*1550*1950mm, net weight 580KG. Drive motor power is 1500W; working motors include a 1000W main brush motor, 310W fan motor, two 100W side brush motors and a 100W vibration dust cleaning motor. Three 48V battery specifications (86Ah, 100Ah, 150Ah) are optional, supporting 4–6 hours continuous operation. The machine adopts zero-turn radius steering design and is fitted with front windshield and protective canopy.