JC1250 Dual Brush Ride-on Industrial Sweeper

JC1250 Dual Brush Ride-on Industrial Sweeper Full English Product Page Content
1. Product Introduction
JC1250 ride-on industrial sweeper has overall dimensions of 1450*1250*1350mm with a net weight of 310KG. It delivers 9500 square meters hourly working efficiency with a 1250mm total sweeping width, supported by one 500mm main brush and two side brushes. The machine carries a 65L water tank and a 90L waste bin, powered by an 800W drive motor, paired with an 800W main brush motor, 250W fan motor and dual 100W side brush motors. Two battery options of 48V 53Ah and 48V 70Ah are provided to support 3–4 hours continuous operation, with a maximum working speed of 10km/h and 25% climbing capacity. Zero-turn steering structure improves flexibility, and multi-brush assembly collects dust, gravel, cans and fallen leaves simultaneously.

2. Core Advantages
1. Triple-brush layout achieves 1250mm sweeping width and 9500㎡ hourly cleaning coverage for large-area ground tasks
2. Two alternative 48V battery groups extend single-shift working duration according to site cleaning demands
3. 90L waste bin reduces the frequency of waste dumping during continuous sweeping cycles
4. Zero-turn radius design enables in-place rotation to clean corners and narrow segmented passages
5. 25% climbing capacity supports cleaning work on sloped ground in parking lots and community roads

3. Product Features
Sweeping Power System
- 500mm main brush matched with two side brushes, total sweeping width 1250mm, hourly efficiency up to 9500㎡
- Independent motor configuration: 800W drive motor, 800W main brush motor, 250W fan motor, dual 100W side brush motors
- Maximum driving speed reaches 10km/h; climbing capacity maintains stable operation on 25% gradient slopes
Power Supply System
- Two battery specifications: 48V 53Ah and 48V 70Ah maintenance-free dry batteries
- Full charged battery supports 3–4 hours non-stop continuous sweeping work
Dust Suppression & Waste Storage System
- 65L independent water tank for dust suppression spraying during operation
- 90L large-capacity detachable waste bin to store gravel, fallen leaves, metal cans and fine dust
Body & Operation Structure
- Overall dimension 1450*1250*1350mm, net machine weight 310KG
- Zero-turn radius steering structure for flexible turning and corner cleaning
- Brushes made of wear-resistant eco-friendly materials to lower accessory replacement frequency

4. Application Scenarios
This ride-on sweeper handles multiple types of waste including fine dust, gravel, metal cans and fallen leaves. It fits large-area cleaning environments such as factory workshops, property communities, municipal roads, residential compounds, campus public zones and logistics parking lots, compatible with cement, asphalt and hard pavement surfaces.

5. Operation & Maintenance Notes
1. Empty all waste inside the 90L bin after each operation and remove debris tangled on main and side brushes
2. Refill the 65L water tank before sweeping tasks that require dust suppression
3. Complete full charging after daily use to avoid long-term storage of undercharged batteries
4. Inspect brush wear regularly and replace worn brush components to sustain complete sweeping coverage
5. Check fan and motor wiring connections before startup to avoid unstable power output during work

6. Common Problems & Solutions
1. Weak dust collection effect
Solutions: Clear blockages inside fan pipelines, clean dust filter screen, check sealing gap between waste bin and machine body
2. Short continuous working time
Solutions: Upgrade to 48V 70Ah battery pack, complete full charging cycle, inspect battery aging attenuation
3. Unsmooth turning operation
Solutions: Remove foreign objects stuck on wheel hubs, adjust zero-turn steering linkage tightness
4. Insufficient climbing power on slopes
Solutions: Confirm battery full charge status, check drive motor circuit connection, clean brush wrapped waste to reduce load

7. Technical Parameter Description
The machine reaches working efficiency of 9500 square meters per hour with a 1250mm sweeping width, 500mm main brush length and 25% climbing capacity. It supports a maximum working speed of 10km/h, equipped with a 65L water tank and a 90L waste bin. Overall dimension measures 1450*1250*1350mm, net weight 310KG. The drive motor power is 800W; operating motors include an 800W main brush motor, 250W fan motor and two 100W side brush motors. Two 48V battery options of 53Ah and 70Ah are available, supporting 3–4 hours continuous work. The machine adopts zero-turn radius steering design.