JC2400 Full Enclosed Cabin Ride-on Road Sweeper

# JCG-2400 Full Enclosed Cabin Ride-on Road Sweeper Complete English Product Page Content
1. Product Introduction
JCG-2400 fully enclosed cabin ride-on road sweeper has overall dimensions of 3100*2000*2150mm and a net weight of 1180KG. It achieves working efficiency over 19000 square meters per hour with a sweeping width exceeding 2100mm, fitted with two 800mm main brushes and four side brushes. Equipped with a 200L water tank for dust suppression and a 240L detachable waste bin, the machine adopts a 3000W drive motor, paired with dual 1200W main brush motors, dual 310W fan motors, four 120W side brush motors and dual 120W vibration dust cleaning motors. Powered by a 48V power system, it supports matching maintenance-free batteries or lithium batteries above 150Ah to realize 6–8 hours continuous operation, with climbing capacity ranging from 25% to 30% and turning radius less than 3000mm. The full transparent enclosed cabin blocks wind, dust and rain, and the multi-brush assembly collects gravel, metal cans and fallen leaves simultaneously. Wear-resistant brush structures lower the replacement frequency of consumable parts.

2. Core Advantages
1. Dual main brush plus four side brush layout forms a sweeping width over 2100mm, delivering hourly cleaning output above 19000㎡ for large-area ground tasks
2. Compatible with 150Ah and above maintenance-free dry batteries or lithium batteries to support 6–8 hours uninterrupted operation
3. 240L integrated waste bin reduces waste dumping frequency during long-hour continuous sweeping cycles
4. Turning radius below 3000mm improves maneuverability on narrow roads, community lanes and campus passages
5. 25%-30% climbing capacity maintains stable sweeping on steep ramps, slope parking lots and gradient municipal pavements

3. Product Features
# Sweeping Power System
- Two 800mm main brushes and four side brushes, total sweeping width over 2100mm, working efficiency higher than 19000㎡/h
- Complete motor configuration: 3000W drive motor, dual 1200W main brush motors, dual 310W fan motors, four 120W side brush motors, dual 120W vibration dust cleaning motors
- Climbing capacity reaches 25%–30%; minimum turning radius under 3000mm for flexible steering
# Power Supply System
- 48V general power supply system, compatible with maintenance-free dry batteries and lithium batteries with capacity above 150Ah
- Full charged battery groups support 6 to 8 hours non-stop continuous sweeping
# Dust Suppression & Waste Storage System
- 200L independent water tank to generate water mist for dust suppression during operation
- 240L detachable waste bin for centralized storage of gravel, fallen leaves, metal cans and surface dust
# Body & Operator Protection Structure
- Overall dimension 3100*2000*2150mm, net machine weight 1180KG, equipped with full closed transparent cabin to isolate wind, flying dust and rain
- Wear-resistant brush components reduce overall consumable replacement costs in long-term use
- Compact steering structure adapts to segmented narrow cleaning areas

4. Application Scenarios
This enclosed cabin ride-on sweeper handles multiple types of surface waste including gravel, metal packaging cans and fallen leaves. It fits large-area cleaning environments such as municipal streets, residential compounds, campus public zones, large logistics yards and industrial factory external pavements, compatible with cement and asphalt road surfaces. The fully sealed cabin enables long-hour outdoor operation under windy and light rain conditions.

5. Operation & Maintenance Notes
1. Empty all waste inside the 240L bin after each operation and clear debris tangled on main and side brushes
2. Refill the 200L water tank before sweeping tasks requiring dust suppression spraying
3. Complete full charging after daily use; avoid long-term storage of batteries with low residual power
4. Inspect brush abrasion regularly and replace worn brush components to maintain complete sweeping coverage
5. Clean dual fan pipelines and activate vibration dust cleaning function periodically to prevent blockages that weaken dust collection effect

6. Common Problems & Solutions
1. Weak dust collection effect
Solutions: Clear blockages inside dual fan pipelines, run vibration dust cleaning motors to shake off filter dust, check sealing gap between waste bin and machine body
2. Short continuous working hours
Solutions: Match batteries with capacity above 150Ah, finish complete charging cycle, inspect battery aging attenuation
3. Stiff turning movement
Solutions: Remove foreign objects stuck on wheel hubs, adjust tightness of steering connecting rod
4. Insufficient power during slope climbing
Solutions: Confirm full battery charge status, inspect drive motor wiring, clear waste wrapped around brushes to lower operation load

7. Technical Parameter Description
The machine provides working efficiency over 19000 square meters per hour with a sweeping width above 2100mm, 800mm main brush length and 25%-30% climbing capacity. Turning radius is less than 3000mm, maximum continuous working time reaches 6–8 hours. It is fitted with a 200L water tank and a 240L waste bin, overall dimension 3100*2000*2150mm and net weight 1180KG. Drive motor power is 3000W; operating motors include dual 1200W main brush motors, dual 310W fan motors, four 120W side brush motors and dual 120W vibration dust cleaning motors. The machine adopts 48V power supply system and is equipped with a fully enclosed transparent operator cabin.