JC1400 Canopy Equipped Ride-on Industrial Sweeper

JC1400 Canopy Equipped Ride-on Industrial Sweeper Full English Product Page Content
1. Product Introduction
JC1400 ride-on industrial sweeper with rain canopy has overall dimensions of 1700*1400*1350mm and a net weight of 420KG. It delivers a working efficiency of 11000 square meters per hour with a 1400mm full sweeping width, consisting of one 600mm main brush and two side brushes. The machine is equipped with a 50L water tank for dust suppression and a 150L waste bin for debris storage. It uses a 1000W drive motor, matched with an 800W main brush motor, 310W fan motor, dual 100W side brush motors and a 100W vibration dust cleaning motor. Three 48V battery options (70Ah, 86Ah, 100Ah) support 4–6 hours of continuous operation, with a maximum speed of 10km/h and 25% climbing capacity. Zero-turn steering structure enhances flexibility, and multi-brush assembly collects fine dust, gravel, metal cans and fallen leaves simultaneously.

2. Core Advantages
1. Triple-brush layout forms a 1400mm sweeping width, supporting 11000㎡ hourly cleaning coverage for extra-large ground areas
2. Three optional 48V maintenance-free dry batteries deliver adjustable 4–6 hours continuous working duration
3. 150L large-capacity waste bin extends intervals of waste dumping during long-hour cleaning shifts
4. Zero-turn radius steering realizes in-place rotation to clean corners and narrow passages
5. 25% climbing capacity supports stable sweeping on sloped roads, parking lots and community ramps

3. Product Features
Sweeping Power System
- 600mm main brush plus two side brushes, total sweeping width 1400mm, hourly efficiency up to 11000㎡
- Independent motor assembly: 1000W drive motor, 800W main brush motor, 310W fan motor, dual 100W side brush motors, 100W dust vibration cleaning motor
- Maximum driving speed reaches 10km/h; stable operation on slopes with 25% gradient
Power Supply System
- Three battery specifications: 48V 70Ah, 48V 86Ah, 48V 100Ah maintenance-free dry batteries
- Full charged battery pack enables 4 to 6 hours non-stop continuous sweeping
Dust Suppression & Waste Storage System
- 50L independent water tank for water mist spraying to control flying dust during operation
- 150L detachable waste bin for centralized storage of dust, gravel, fallen leaves and metal packaging waste
Body & Operation Structure
- Overall dimension 1700*1400*1350mm, net machine weight 420KG, fitted with external rain canopy for outdoor all-weather operation
- Zero-turn radius steering structure for flexible turning and edge cleaning
- Brushes made of wear-resistant eco-friendly materials to reduce accessory replacement frequency

4. Application Scenarios
This ride-on sweeper collects various types of waste including fine dust, gravel, metal cans and fallen leaves. It adapts to large-area cleaning environments such as factory workshops, property communities, municipal roads, residential compounds, campus public zones and logistics parking lots, compatible with cement and asphalt pavement surfaces. The matching rain canopy supports outdoor operation under light rain.

5. Operation & Maintenance Notes
1. Empty all waste inside the 150L bin after each operation and remove hair, thread and debris tangled on main and side brushes
2. Fill the 50L water tank before sweeping tasks that require dust suppression spraying
3. Complete full charging after daily use; avoid long-term storage of batteries with low residual power
4. Inspect brush wear regularly and replace worn brush components to maintain complete sweeping coverage
5. Clean the vibration dust filter and fan pipeline regularly to prevent blockages that reduce dust collection efficiency

6. Common Problems & Solutions
1. Reduced dust collection performance
Solutions: Clear blockages inside fan pipelines, run the vibration dust cleaning motor to shake filter dust, check sealing gap between waste bin and machine body
2. Short continuous working time
Solutions: Upgrade to higher-capacity 86Ah or 100Ah battery pack, complete full charging cycle, inspect battery aging attenuation
3. Inflexible turning movement
Solutions: Remove foreign objects stuck on wheel hubs, adjust zero-turn steering linkage tightness
4. Insufficient power during slope climbing
Solutions: Confirm full battery charge status, check drive motor wiring connections, clear waste wrapped on brushes to lower operation load

7. Technical Parameter Description
The machine achieves working efficiency of 11000 square meters per hour with a 1400mm sweeping width, 600mm main brush length and 25% climbing capacity. It supports a maximum working speed of 10km/h, equipped with a 50L water tank and a 150L waste bin. Overall dimension measures 1700*1400*1350mm, net weight 420KG. The drive motor power is 1000W; operating motors include an 800W main brush motor, 310W fan motor, two 100W side brush motors and a 100W dust vibration motor. Three 48V battery options of 70Ah, 86Ah and 100Ah are available, supporting 4–6 hours continuous work. The machine adopts zero-turn radius steering design and matches a protective rain canopy structure.