JC2100 Full Closed Cabin Ride-on Industrial Sweeper

JC2100 Full Closed Cabin Ride-on Industrial Sweeper Complete English Product Page Content
1. Product Introduction
JC2100 fully enclosed cabin ride-on industrial sweeper has overall dimensions of 2200*2000*2200mm and a net weight of 800KG. It delivers 15000 square meters per hour working efficiency with a total 2100mm sweeping width formed by one 800mm main brush and four side brushes. The machine is equipped with a 200L water tank for dust suppression and a 240L waste bin for debris storage. It adopts a 2200W drive motor, matched with a 1000W main brush motor, dual 310W fan motors, four 100W side brush motors and dual 100W vibration dust cleaning motors. Three 48V maintenance-free dry battery options (103Ah, 153Ah, 203Ah) support 5–8 hours continuous operation, with a maximum driving speed of 10km/h and 25% climbing capacity. Zero-turn steering enhances flexibility, and the full transparent sealed cabin isolates wind, dust and rain for operators. All five sweeping brushes are manufactured from wear-resistant eco-friendly materials to lower accessory replacement frequency.

2. Core Advantages
1. Five-brush combined layout forms a 2100mm ultra-wide sweeping width to reach 15000㎡ hourly cleaning coverage for super-large ground areas
2. Three tiers of 48V battery capacity deliver adjustable 5–8 hours continuous working duration to satisfy long-shift cleaning demands
3. 240L large-volume waste bin extends intervals of waste dumping during uninterrupted cleaning cycles
4. Zero-turn radius design realizes in-place rotation to clean road curbs, corners and narrow segmented passages
5. 25% climbing capacity supports stable sweeping on sloped parking lots, community ramps and gradient municipal roads

3. Product Features
Sweeping Power System
- Single 800mm main brush plus four side brushes, total sweeping width 2100mm, hourly efficiency up to 15000㎡
- Independent multi-motor assembly: 2200W drive motor, 1000W main brush motor, dual 310W fan motors, four 100W side brush motors, dual 100W vibration dust cleaning motors
- Maximum travel speed reaches 10km/h; stable operation on slopes with 25% gradient
Power Supply System
- Three optional 48V maintenance-free dry batteries: 103Ah, 153Ah, 203Ah
- Fully charged battery pack enables 5 to 8 hours non-stop continuous sweeping work
Dust Suppression & Waste Storage System
- 200L independent water tank to supply water mist for dust suppression during sweeping operation
- 240L detachable waste bin for centralized storage of dust, gravel, fallen leaves and packaging waste
Body & Operator Protection Structure
- Overall dimension 2200*2000*2200mm, net machine weight 800KG, fitted with full closed transparent cabin to block wind, dust and rain
- Zero-turn radius steering structure for flexible turning and edge cleaning
- Eco-friendly wear-resistant brush materials to reduce regular accessory replacement costs

4. Application Scenarios
This fully enclosed ride-on sweeper adapts to large-area outdoor cleaning environments including industrial factory zones, municipal trunk roads, logistics distribution parks, residential compounds, campus public areas and large underground parking lots. It fits cement and asphalt pavements, and the sealed cabin supports all-day operation under windy, dusty or light rain weather conditions.

5. Operation & Maintenance Notes
1. Empty all waste inside the 240L bin after each operation and clear hair, threads and debris tangled on main and side brushes
2. Refill the 200L water tank before sweeping tasks requiring dust suppression spraying
3. Complete full charging after daily use; avoid storing batteries with low residual power for long periods
4. Inspect brush abrasion regularly and replace worn brush components to maintain complete sweeping coverage
5. Activate dual vibration dust cleaning functions and clean dual fan pipelines periodically to prevent blockages that weaken dust collection efficiency

6. Common Problems & Solutions
1. Reduced dust collection effect
Solutions: Clear blockages inside dual fan pipelines, run vibration dust cleaning motors to shake off filter dust, check sealing gap between waste bin and machine body
2. Short continuous working hours
Solutions: Upgrade to high-capacity 153Ah or 203Ah battery pack, finish complete charging cycle, test battery aging attenuation
3. Inflexible turning movement
Solutions: Remove foreign objects stuck on wheel hubs, adjust tightness of zero-turn steering connecting rod
4. Insufficient climbing power on slopes
Solutions: Confirm full battery charge status, inspect drive motor wiring, clear waste wrapped around brushes to lower operation load

7. Technical Parameter Description
The machine achieves working efficiency of 15000 square meters per hour with a 2100mm sweeping width, 800mm main brush length and 25% climbing capacity. The maximum working speed is 10km/h, equipped with a 200L water tank and a 240L waste bin. Overall dimension measures 2200*2000*2200mm, net weight 800KG. Drive motor power is 2200W; working motors include a 1000W main brush motor, dual 310W fan motors, four 100W side brush motors and dual 100W vibration dust cleaning motors. Three 48V battery specifications (103Ah, 153Ah, 203Ah) are optional, supporting 5–8 hours continuous operation. The machine adopts zero-turn radius steering design and is fitted with a fully closed transparent operator cabin.