JCSX-200 Open Cabin Ride-on Sweep Scrub All-in-One Machine

JCSX-200 Open Cabin Ride-on Sweep Scrub All-in-One Machine 
1. Product Introduction
JCSX-200 open-cabin ride-on sweep scrub all-in-one machine integrates sweeping and floor washing functions, with a max working efficiency of 5500㎡ per hour. It has a 1350mm sweeping width, 900mm washing width and 1200mm suction width, supporting independent or simultaneous use of sweeping and washing modules. Fitted with a 200L clean water tank, a 260L sewage tank and a separate 50L waste bin, the unit is equipped with a 590mm main brush, two 500mm side brushes and dual 460mm wash discs driven by two 550W motors. High-pressure flushing and spray accessories are optional for equipment cleaning. The low-gravity chassis and large anti-slip tires ensure stable driving on wet floors and gentle slopes, with a max travel speed of 10km/h. It works on cement, epoxy, asphalt and other hard floors to collect solid waste and remove surface stains.
2. Core Advantages
Separately controlled sweeping and washing modules to realize single sweeping, single washing or combined cleaning modes
Dual side brushes gather edge and corner waste; the main brush transports solid debris into an independent waste bin to separate garbage and sewage
Large-volume 200L clean water tank and 260L sewage tank cut down frequent water replacement and sewage draining
Low-center chassis and anti-slip tires maintain stable traction on slippery ground and gentle slopes
Compact body structure for flexible turning, suitable for narrow passages and limited-space areas
Optional high-pressure spray fittings to clean machine body and waste bin
3. Product Features
Sweeping & Washing System
500mm dual side brushes + 590mm main brush deliver 1350mm sweeping coverage; two 550W motors drive 460mm wash discs for 900mm washing width, matched with a 1200mm wide suction hood for full sewage recovery
Independent control circuits for sweeping and washing to switch working modes freely
Optional high-pressure flushing & spray accessories for self-cleaning
Liquid & Waste Storage System
200L clean water tank for cleaning solution storage; 260L sewage tank for wastewater collection; independent 50L bin for solid dust and gravel
Driving Chassis Structure
Low gravity center chassis, large anti-slip tires to reduce slipping risk on wet and sloped ground
Max travel speed up to 10km/h, compact size for flexible steering
Operator Structure
Open cabin driving layout with wide vision during cleaning operation
4. Application Scenarios
This all-in-one sweep scrub machine fits all kinds of hard ground including cement floors, epoxy floors and asphalt pavements. Applicable locations include factory workshops, logistics warehouses, shopping malls, underground parking lots, campus walkways and community public zones. It handles mixed cleaning tasks of solid debris, dust and liquid ground stains.
5. Operation & Maintenance Notes
Empty solid waste bin and drain sewage tank after each operation
Regularly clean side brushes, main brush and wash discs to avoid winding debris reducing cleaning effect
Flush suction pipelines and suction hood to prevent clogging and weak suction
Inspect tire wear and chassis fastness before daily startup
If equipped with high-pressure flushing parts, drain residual water in pipelines after use to avoid blockage
6. Common Problems & Solutions
Incomplete sewage recovery
Solutions: Check suction hood seal; clean blocked pipelines; clear debris wrapped on wash discs
Poor garbage collection at wall corners
Solutions: Adjust side brush ground clearance; clear waste inside main brush housing
Slipping on wet ground
Solutions: Check tire anti-slip pattern wear; lower driving speed on slippery floors
Single sweeping/washing function fails
Solutions: Inspect independent control switches and motor wiring circuits
7. Technical Parameter Description
Max working efficiency: 5500㎡/h; sweeping width 1350mm, washing width 900mm, suction width 1200mm. Clean water tank 200L, sewage tank 260L, waste bin 50L; max travel speed 10km/h. Main brush length 590mm, side brush diameter 500mm, wash disc diameter 460mm with dual 550W wash disc motors. Packaging dimension: 215011001450/700mm, open cabin design, optional high-pressure flushing function.